SLIP RINGS

SLIP RINGS

DIMO Corp. provides various slip rings through our OEM’s, these products are developed for rugged environments and demanding requirements.  Typical applications include FLIR systems, blade de-ice, target acquisition systems, tank turrets, and manned/unmanned vehicles.

We supply the following slip rings: electro-optic systems, helicopter slip rings, miniature slip ring capsules, propeller slip rings, vehicular slip rings, compact slip rings, ethernet slip rings, high-speed slip ring capsules, large diameter slip rings, separates and slip rings with through bores.

A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. Also called a rotary electrical joint, collector or electric swivel, a slip ring can be used in any electromechanical system that requires unrestrained, intermittent or continuous rotation while transmitting power and / or data. It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints.

For high-speed data transfer or for data transfer in EMI sensitive environments, we carry a line of Fiber Optic Rotary Joints (FORJ’s).

Below you will find a list of various synchros, if you don’t see the one you are looking for, click the link to send an RFQ.

Model Circuits Current Voltage Size D” x L” (mm)  Speed Through Bore
AC264 20, 30, 40, 50, 60 0.8 amp 100 VDC .75″ x 1.04-2.24″ (19.1 x 26.5 – 56.9mm) 100 rpm No
AC267 16, 20, 24, 28, 32, 36 0.8 amp 100 VDC 1.0″ x.90 -.1.51″ (25.4 x 23.1 – 38.6mm) 100 rpm No
AC6292 80 0.8 amp 100 VDC .68″ x 2.0″ (17.2 x 50.8mm) 40 rpm No
RK4288 95 0.8 amp 70 VDC 1.5″ x 3.3″
(38.1 x 84mm)
40 rpm No
M Series Up to 120 2 amps 60 VDC 2.8″ – 5.5″( 71.1 – 139.7 mm) To 1,000 rpm No
AC3757 Up to 36 1 amp 100 VDC 2.2″ x 2.5″ (56 x 63.5 mm) 3500 rpm std. 8000 rpm cooled No
RE4815 32 1.2 amperes 50 VAC / VDC 0.50″ x 1.32″ (12.7 x 33.5mm) 600 rpm No
HSR Various Signal to 300 amps up to 400 volts Various 50 rpm Various
SRA-73540 6 and 12 2 amps 120 VDC/
VAC
.44 x .44 (11.17 x 11.17) 250 rpm No
SRA-73625 18 2 amps 120 VDC/
VAC
.44 x .83 (11.18 x 21.0) 100 rpm No
AC6373 6 and 12 2 amps 120 VDC/VAC .5 x .86 or 1.11 (12.7 x 21.7 or 28.2) 100 rpm No
SRA-73526 SRA-73528
SRA-73599
6, 12, 18, 24 2 amps 210 VDC/ 240 VAC .5 x .86 or 1.11 (12.7 x 21.7 or 28.2) 250 rpm No
AC6023 6, 12, 18, 24 2 amps 210 VDC/ 240 VAC 0.87 x 1.14 – 1.98 (22.1 x 29-49.5) 250 rpm No
SRA-73762 12,18, 24 2 amps 210 VDC/240 VAC .61 x 1.56 (15.5 x 39.6) 250 rpm No
SRA-73574 SRA-73587 36 2, 10, 24 amps 210 VDC/ 240 VAC 0.87 x 2.2 (22.0 x 55.8) 250 rpm No
AC6305 3, power and 6,9 or 12 signal 5 amps/2 amps 120 VAC 0.87 x 1.95 (22.1 x 49.5) 250 rpm No
AC6310 3, power and 3 or 6 signal 10 amps/2 amps 120 VAC 0.87 x 1.95 (22.1 x 49.5) 250 rpm No
AC6355 36 and 56 2 amps 240 VAC 1.0 x 2.6 or 3.5 (25.4 x 66.0 or 88.9) 250 rpm No
AC7094 30, 36, 42 or 48 5 amps 250 AC / DC 2.17 x 5.02-6.69 (55.1 x 127.5-169.9) 250 rpm No
AC7036 Variable, refer to AC6349 and AC6355 models 15 amp outer; 2, 5, 10 amp inner 440 V on 15 amp; varies on inner see AC6355 model 3.1 x 6.5 (78.74 x 165.1) 150 rpm No
P Series 2 and 8 7-14 amps 240 VAC 3.2 x 1.2 (83.3 x 31.7) 400 to 600 rpm No
PH Series 8 or 12 2 amps 50 VAC 57.15 – 69.85″L 38.10″ OD 1451.6 – 1774.2 967.7 OD To 20,000 No
AC3757 36 1 amps 70 VAC 2.20 x2.50″ 56 x 63.5mm 4,000 rpm std. 6,000 rpm cooled No
AC6231 8 15 amps/circuit 220VAC 4.25″OD x 2.44″L 107.9 OD x 61.9mmL 2,500 rpm 1.5″
EC3848 2, 6, 8, 10 1 amps 100 VDC 1.25 x 1.20″ 31.75 – 30.5 10,000 rpm No
Endura Trac Plus W Series To 24 Power circuits 30 amps 600 VAC 5 – 12.5″ OD 127 – 317.5 mm L determined by number of rings 1,000 rpm 1.5″ to 9.0″
To 100
Signal circuits
5 amps 250
VAC
PM Series 8, 12, 14 2.5
amps
max.
50
VAC
132″ – 216″L OD
3352.8 OD – 1572.2mmL
12,000 rpm No
SRA-73683 6,12,18,24 2 amps 210 VAC 1.375 x. 98-1.72 (34.9 x 24.9-43.68) 120 rpm 1/2″
AC6438 6,12,18,24 5 amps 250 VAC 2.0 x 1.54-3 (52.8 x 81.5) 250 rpm 1/2″
AC6349 6,12,18,24 15 amps 440 VAC 3.07 x 2.9 or 6.5 (78.0 x 73.7 or 165.1) 250 rpm 1″
AC4598 6,12,18,24 10 amps 600 VAC 3.9 x 2.28-5 (100 x 56-127) 250 rpmor higher 1-1/2″
AC6200 12,24,36,48 2 amps 220 VAC 3.9 x 2.28-5 (100 x 56-127) 250 rpm 1-1/2″
AC6815 Up to 128 2, 3.5,10 amps 60, 110, 220 VAC 4.32 x 3-5.94 (109.7 x 76.2-150.8) 250 rpm 1-1/2″
AC6428 60, 72, 84, 96 2 amps/circuits 220 VRMS 3.9 x 6.5-9.3 (99.06 OD x 167.64-238.76) 250 rpm 1-3/8″
AC6429 48 @ 2 amp PLUS 6 or 12 @ 10 amp 10 Amp and 2 amps/circuit 220 VRMS, 2 amp;460 VRMS 10 amp 3.9 x 7.4 (99.06 OD x 190.5) 250 rpm 1-3/8″
AC6275 1 to 72 Signal, 10,30,50 amps 600 VAC 6.63 x 7.6-21.5 (168.4 x 193-546) 1000 rpm 2-3/4″
AC6098 1 to 72 Signal, 10,30,50 amps 600 VAC 8 x 5.32-15.32 (203.2 x 135-390) 250 rpm 4″
Endura Trac Standard W Series To 12Power circuits Power, 30 amps 600 VAC 5-6.5 OD (127-165.1)Determined by Number of Rings 60 rpm 1.5″to 3.0″
To 24Signal circuits Signal, 5 amps 250 VAC